Timber Frame Pavilion Info & Options Check out the Pavilion Options and Features We Offer.
In the following sections, you will find information pertaining to proper footer installation for your pavilions foundation. We also touch on some common inquires we get about fireplaces, post stand-offs, and gutters. We hope this can be a source of accurate information to you that can assist in your Timber Frame Pavilion buying experience.
Installing Your Pavilion
Are you unsure of what all is included with the purchase of a Lancaster County Backyard Pavilion? Don’t worry, we are here to help.
Your Pavilion’s Foundation
Like any structure, the foundation is an important part of the project.
For smaller backyard pavilions:
- Install footers/piers. Use our provided drawings for pier locations and specifications.
- For paver patios
- The top of the footers should be just below the bottom of the paver stone level.
- Post Stand-offs are recommended. (View example pdf here)
- For a concrete slab with footers choose one of the following methods:
- Install the tops of the footers just under the slab.
- Install the tops of the footers to the same height as the slab [the tops of the footers will always be visible].
- For paver patios
- In the case of a new paver patio, we recommend waiting to install the pavers until after the pavilion has been installed.
For larger pavilions:
- Install footers/piers. Use our provided drawings for pier locations and specifications.
- For a concrete slab with footers choose of the following methods:
- Install the tops of the footers to the same height as the slab.
- [The tops of the footers will always be visible]
- The concrete slab should be poured after the pavilion has been installed.
- Install the tops of the footers 4” below the finished patio surface
- Install 4” Post Standoffs. (View example pdf here)
- Pour the slab after the pavilion has been installed.
- Install the tops of the footers to the same height as the slab.
- For a concrete slab with footers choose of the following methods:
How to install footers/piers for a smaller backyard pavilion, if I have an existing paver patio?
- A section of pavers approximately 24-30” in diameter should be removed at each post location.
- Install piers. The top of the pier should be approximately 1” below the bottom of the pavers.
- This allows for a small layer of sand to be installed on top of the footer for easy paver installation.
- The tops of the piers do not need to be level with each other.
- Install Post Stand-offs. (View example pdf here)
- Erect structure.
- Reinstall pavers. Cut and fit pavers around the posts.
How will my structure be anchored to the concrete piers?
- A flat area is needed in order to place the post bracket. We then drill into the concrete and insert wedge anchor bolts.
- As the customer, you should not wet-set any brackets or j-bolts into the concrete.
Timber Frame Pavilion Features
Upgraded Stains
Natural
Mahogany Flame
Honey Teak
Jarrah Brown
Roof Material
Available in 3 different styles.
Asphalt (Standard)
Regular Metal (Premium Upgrade)
Standing Seam Metal (Deluxe Upgrade)
Asphalt Shingle Colors
30-year architectural asphalt shingles are included as standard, but you may upgrade to a Metal Roof.
Barkwood
Biscayne Blue
Charcoal
Hickory
Williamsburg Slate
Weathered Wood
Shakewood
Pewter Gray
Hunter Green
Fox Hollow Gray
Patriot Red
Slate
Regular Metal Roof Colors
See additional colors here!
Bone White
Colonial Red
Slate Blue
Forest Green
Bronze
Charcoal
Black
Standing Seam Metal Roof Colors
See additional colors here!
Copper Penny
Classic Green
Charcoal Gray
Bright Red
Matte Black
Gallery Blue
Antique Bronze
Optional Kingston Pro Upgrade Package
Interested in the Kingston Pavilion, but you like the look of the extended beams and the steeper roof pitch of the Denali and Grand Teton? Check out the Kingston Pro upgrade package that we offer. View the Kingston Pro comparison sheet here.
Additional Customization & Options
Post Stand Off’s
- Post stand-offs are always recommended if the post mounting locations are positioned below the patio surface. The goal is that the bottom of the posts are elevated slightly above the patio surface thus ensuring greater longevity for the structure.
- Example: a patio consisting of pavers with footers placed beneath the pavers.
- Post stand-offs are available in 2.5” and 4” to accommodate various patio scenarios. (View example pdf here)
Fireplaces
- Does LCB install Fireplaces?
- No, we primarily work with the customer’s mason/contractor.
- Where should the chimney be placed?
- The most popular location is in the center of the gable allowing the majority of the chimney to be visible from inside the pavilion. Typically, the chimney is placed immediately next to the outermost truss.
- How tall should the chimney be?
- If installed in the gable side it should be 3’ higher than the roof
- If installed in the eave side it should be 2’ higher than any part of the building that is within 10’.
3rd Gable
- Can I add an extra gable?
- An additional gable(s) can be added to the Kingston Pro, the Denali, and the Grand Teton.
Gutters
- Can I add rain gutters?
- The Timber Frame Pavilions can be modified to include fascia boards to accommodate standard house type 5k gutters.
- Alternatively, gutters can be added to a structure without fascia boards using specialized Roof Strap Hangers.
Electrical
- An electrical package is not offered as a regular option for timber frame pavilions.
- If electrical is desired in the pavilion, we recommend installing an external conduit directly beside one of the posts.
- The conduit should protrude beyond the top of the concrete at least 24”
- An outlet/junction box can be installed at this location
- The conduit can then be continued on up the side of the post and enter the roof system
- Desired fixture locations can be achieved using a combination of exposed conduit and running exterior UF wiring in inconspicuous areas.
- If you instead prefer to run hidden wiring within the timbers, we may be able to assist in a per case scenario.
- For the placement of switches and receptacles, consider locating them in your outdoor kitchen, on the sides of the chimney, or on nearby structures if you have the option.
Timber Frame Pavilions – FAQ
How do I order a Timber Frame Pavilion?
- Request a formal estimate.
- Sign the estimate and provide the deposit.
- Your structure is ordered!
Can I customize the Timber Frame Pavilion design?
- LCB is able to fully customize any of our structures; however, this can typically only be offered to a small number of customers per year. Smaller levels of customization are more readily available. The amount of custom jobs is dependent on the lead time.
- If customization is requested, the following Design Phase process can be expected:
- You provide the size and structure design/details.
- LCB will provide a budget number.
- You enter the Design Phase (payment required).
- LCB will draw the structure and work together with you to adjust the design as needed.
- LCB will provide a firm estimate.
Where does LCB install Timber Frame Pavilions?
- LCB installs TF Pavilions primarily in the Mid-Atlantic states but can frequently offer installation in any of the states in the East.
Where does LCB ship DIY Timber Frame Pavilion kits?
- Timber Frame Pavilion kits are available nationwide across the contiguous USA.
Are permits required?
- This is a question for your local municipality.
- LCB does not obtain permits.
Why do Timber Frame Pavilion cost more than standard Wood or Vinyl Pavilions?
The sheer amount of wood required for a timber frame construction makes it more expensive than its wood or vinyl counterparts. Also, the mortise and tenon style of building requires a higher level of engineering and expertise to complete. These factors combine to make a Timber Frame Pavilion cost more than a standard wood or vinyl pavilion.
Do I need Post standoffs?
Post standoffs are recommended if the footers are positioned below the patio surface so the bottoms of the wooden posts do not reside beneath the patio surface. (View example pdf here)
Can I attach a Timber Frame Pavilion to my house?
- Typically, yes, but it usually requires additional planning, engineering, and inspections than a free-standing pavilion.
- The following are a few preliminary factors to consider:
- Is your house 1 story or 2 stories at the point of attachment?
- Will the posts or roofline interfere with any doors or windows on your house?
- Does your house have a basement in the area adjacent to the wall on which the pavilion would be attached?
- Whether LCB is able to offer installation of attached pavilions is dependent on the lead time.
Can I mount a Timber Frame Pavilion on my wood/composite deck?
- Unless an engineer determines how to properly reinforce your deck, we do not recommend it.
- A good alternative method is to install concrete footers/piers under your deck, install the pavilion incorporating longer posts, and then install the deck boards.
My patio is sloped. Do you factor this in while onsite?
Yes! We use a laser level and cut the posts onsite as needed.
Can LCB provide engineered stamped drawings if required by your municipality?
In most states, we are able to provide engineered/architectural stamped drawings for pavilions.
How to start planning for your outdoor living structure?
- See the Guidebook for important basic concepts.
- Send photos and measurements of the desired location for the outdoor living structure to sales@lancastercountybackyard.net.
- We will be happy to review your photos and discuss possible scenarios/ideas with you.
- A site visit/consultation can be requested for a fee based on your location.